Remote Relay Control; Save Number Redial; Self-Labeling Display (Iwatsu Icon 5930/5910/5810 Phones Only) - Iwatsu ENTERPROSE-CS Owner's Manual

Remote Relay Control

Allows you to activate/control a remote device. For example, a door opener or
a monitor camera.
 Press the Remote Relay Control key REMOTE
 Enter the relay number 1 to 8.
Ring Muting
Allows you to turn the ringer, microphone, and speaker off at your phone.
Ring Muting is recommended instead of Do Not Disturb when the Call
Coverage feature is installed.
To turn the ringer off:
 Press the Silent key SILENT and the lamp for that key will be solid red
To turn the ringer on:
 Press the Silent key SILENT and the lamp for that key will be off

Save Number Redial

Allows you to save a number that you dialed when you receive either a busy
signal or no answer. The memory for this feature is shared with Memo Dial.
While making a call:
 Press the Feature key FEAT then dial
Redial key SAVE if assigned as a Multipurpose key
You will hear a confirmation tone.
To make a Save Number Redial call:
 Lift the receiver
 Wait for the dial tone
 Press the Feature key FEAT then dial
Redial key SAVE if assigned as a Multipurpose key
Self-Labeling Display (Iwatsu ICON 5930/5910/5810
Phones Only)
The Iwatsu ICON Series 5930, 5910, and 5810 Telephones are equipped with
Self-Labeling keys that support up system features. When a key, that resides
on the LCD, is changed on the key pattern of your telephone, the label for that
key will change. Changing the label of a Self-Labeling Key can be performed
through the telephone or through the Iwatsu Programmer. The key telephone
IWATSU TELEPHONE USER GUIDE - 148

, or, press the Save Number

, or, press the Save Number