To Cancel Via Disa - Iwatsu ENTERPROSE-CS Owner's Manual

To Cancel Via DISA

 Refer to section seven for use of the DISA feature
 Wait for the intercom dial tone

 Press
 Enter the Call Forward Code
 Enter the Call Type number you wish to cancel
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
 Wait for a confirmation tone
 Hang up
Call Hand-Off With Mobility Key
The Call Hand-Off feature allows the seamless transfer of an active call from
an Iwatsu ICON Series 5930, 5910, or 5810 to another phone (e.g., cell phone
or another ECS extension) using the Mobility key. The Mobility key will
display up to eight selectable internal or external destinations based on location
settings defined in the Esnatech Officelinx client application.
While on a call (internal or external):
 While the Mobility key is flashing (red or green), press the Mobility
key to display a list of available destinations.
 Non-Officelinx transferred calls (i.e., Intercom, DID calls) will light the
Mobility key red LED (flashing). All calls that were trombone
transferred via Esnatech Officelinx will light the Mobility key green
LED (flashing).
 A maximum of eight destination names (up to eleven characters) can be
displayed. The source of the destination list selections listed in the
ICON menu is based on the Esnatech Officelinx client locations
programming.
 When a mobility destinations is selected, the number will appear on the
display and the menu will change to Now Transferring To.
 When the transfer is complete, Transfer Successful will appear on the
display.
 The menu will remain on display until the user presses the Exit key, the
menu inactive timer expires, or the Esnatech Officelinx turns off the
lamp.
43
Ibid.
IWATSU TELEPHONE USER GUIDE - 119
43
