Whisper Page; Whisper Monitor - Iwatsu ENTERPROSE-CS Owner's Manual

Whisper Page

The Whisper Page feature allows ECS station users to communicate with busy
extensions without requiring the IX-BPAD Busy Bypass Unit. This feature is
available from any ECS digital key telephone, SLT, or Attendant station.
When a busy station is called using the Whisper Page feature, the busy station
will hear the voice announcement via the handset receiver. Neither the whisper
page, nor the busy station's response is audible to the outside calling party.
You may also use the Text Message feature to respond to a Whisper Page.
To Whisper Page a busy station:
 After calling a busy station and receiving busy tone
 Press 
To communicate with a station that whisper paged your extension:
 After receiving a whisper page
 Press 
 You may now communicate with the station that sent you the whisper
page. The other calling party cannot hear your call
 To resume speaking with the original caller, press  a second time.
To send a Whisper Page during consultation hold
 During consultation hold press * and announce the call
 If the busy station wishes to take the call, hang up to camp-on the call
To select and send a text message to the originating Whisper Page station:
 After you receive a whisper page, press the Text Message key TEXT
MSG + text message number (00 – 99), or the Preprogrammed Text
Message key TEXT MSGn
For more information on Text Messaging, see Text Messaging in this section.

Whisper Monitor

Station Coaching consists of two parts: Call Monitoring and Whisper Monitor.
See STATION COACHING for additional information on Call Monitoring,
Whisper Monitoring or Station Coaching.
IWATSU TELEPHONE USER GUIDE - 169