Disconnecting Or Releasing A Call - Iwatsu ENTERPROSE-CS Owner's Manual

Disconnecting or Releasing a Call

 Hang up, or, press the Release key RLS
When transferring an outside call to an extension, pressing the Release key
RLS returns you to the outside caller.
Making an Intercom Group Call
 Dial the Intercom Group access number.
Making an E-Response Help Call
 Lift the receiver or press [SPKR] and remain off hook for a duration that
exceeds the amount of time programmed in the system, or
 Lift the receiver and begin dialing. Between digits stop dialing for more
than 10 seconds, or
 Dial the E-Response Group access number at Intercom dial tone.
Receiving an Intercom Call
Internal or intercom calls will flash the lamp on the Operator key OPER at the
Attendant Position.
To answer intercom calls with the receiver in the cradle:
 Lift the receiver
To answer intercom calls with the receiver not in the cradle:
 Lift the receiver
 Press the red flashing Operator key OPER
ATTENDANT POSITION USER GUIDE - 176