Iwatsu ENTERPROSE-CS Owner's Manual page 48

Attendant Position
The Attendant Position consists of an IP or Digital Multiline Display
Telephone and a Direct Station Selection Unit. The maximum number of DSS
Units and Attendant Consoles that may be used in an ECS is 128 total. The
ECS system supports a maximum of 64 Iwatsu ICON Series 59DS units as
part of the 128 total DSS units supported in the ECS system.
Iwatsu ICON Series 59DS
Note: Only the Iwatsu ICON Series 5930, 5910, and 5810 telephones are
compatible with the Iwatsu ICON Series 59DS unit.
The Iwatsu ICON Series DSS Unit (59DS) was designed for use with the
Iwatsu ICON Series IP and Digital telephones (5930, 5910, and 5810 only).
The 59DS is equipped with a 15-line, 24-character backlit LCD display, and
30 Self-Labeling keys that support up to 60 features. One 5930, 5910, or 5810
supports a maximum of two 59DS units.
The 59DS includes a three position integrated pedestal with a built-in wall-
mount option that simplifies installation. The wall mount option requires the
IX-59WMS-1 Wall Spacer. The 59DS supports Power over Ethernet or local
power when the optional IX-59AC (PN 505099) is installed.
Red flashing lamp:
Solid red lamp:
Green flashing lamp:
Solid green lamp:
SIP Telephones
Industry standard SIP phones can be connected as on-premise or as off-
premise extensions.
Single Line Telephones
Industry standard single line telephones (either 500 or 2500 type) can be
connected as on-premise or as off-premise extensions.
The extension is in the Do Not Disturb, Call
Forward, Absence Message, Station Forced
Release or Station Lock mode.
The extension is busy.
The extension has the Message Waiting lamp lit.
The extension is talking with the attendant.
GENERAL DESCRIPTION - 30