Hands-Free Answerback On Intercom; Headset Control Key - Iwatsu ENTERPROSE-CS Owner's Manual

Table of Contents

Advertisement

 Lift the receiver
 Wait for the dial tone
 Dial your Group Park code

Hands-Free Answerback on Intercom

Allows you to answer an intercom call without lifting the receiver. The
microphone may be turned off if desired.
To turn on Hands-Free Answerback:
 Press the Feature key FEAT then dial
MIC OFF if assigned as a key and the lamp will be off.
To turn off Hands-Free Answerback:
 Press the Feature key FEAT then dial
MIC OFF if assigned as a key and the lamp will be solid red

Headset Control Key

The Headset Control key for use with the Iwatsu ICON Series, Platinum
Series, IX-12KTD/S-3 Digital Key Telephones and the IX-12IPKTD/-E IP
Telephones allows you to control a headset without using the Connect or
Release key. This key is also supported on the IX-12KTD-2, but requires a
headset adaptor box to switch the audio between handset and headset. This key
is a replacement for the Headset key.
Iwatsu recommends placing a Headset Control key in the key pattern of your
Iwatsu ICON Series telephone when a Bluetooth headset is used.
To begin a call:
 Press the Headset Control key while the phone is idle.
To answer a call:
 Press the Headset Control key when receiving a ringing or incoming
call.
To end a call:
 Press the Headset Control key to disconnect when finished with the
call.
To transfer a call using Screened Transfer:
 Press the TRAN key.
 Dial the telephone number.
 When the party answers, press the Headset Control key.
IWATSU TELEPHONE USER GUIDE - 135

, or, press the MIC OFF key

, or, press the Mic Off key

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterprise-cs

Table of Contents