Dial the Speed Dial code.
The system will automatically dial the registered number.
Station Restriction Password
To restrict your phone:
Lift the receiver.
Wait for the dial tone.
Dial the Station Restriction Password code
Dial your password.
Hang up.
To cancel restriction at your phone:
Lift the receiver.
Wait for the dial tone.
Dial the Cancel code
Dial the Station Restriction Password code
Dial your password.
Hang up.
Single Line Message Waiting Stutter Dial Tone
SIP – Not Supported from the system. The SIP telephone
controls its own dial tone. Your specific telephone may have this
feature.
When a Single Line Telephone that has a message goes off-hook, the Iwatsu
Enterprise-CS automatically sends an intermittent tone for 2 seconds before
normal dial tone is heard. This feature alerts you of messages.
To determine if you have a message on a Single Line Telephone:
From the telephone's idle state, go off hook.
If a message exists, you will hear a stutter dial tone.
System Announcement Message
To play the System Announcement Message:
Lift the receiver.
Wait for the dial tone.
Dial the System Announcement Message code
SIP & SINGLE LINE TELEPHONE USER GUIDE - 218
.
.
.
.