Making a Page Announcement
Lift the receiver
Press and hold the Page key PAGE and the lamp will flash red
Wait for the Page tone
Make an announcement
Release the Page key PAGE to disconnect the paging circuit
Advanced Features
911 Call Indication
Up to 32 ECS extensions may be designated as attendant positions. An
attendant position typically consists of an ICON 5930, 5910 or 5810 phone
with one or more ICON 59DS units or PC Attendant or Virtual DSS console.
In addition to system features ECS provides the Attendant Position features
listed below:
When a system extension dials 911, the extension number of the station calling
911 will be displayed on the LCD of the attendant station. If E911 Routing is
not successful, a "FAIL" indication will be displayed on the LCD. The alarm
tone will sound at the attendant position when LCD indication is made. In
order to clear the display, the Attendant must press a 911 Display Clear Key
programmed on the extension.
To clear the display of the Enhanced 911 LCD Indication.
Press [E911 Display Clear] key.
Alarm Clear
Allows you to clear alarm indication(s).
Press the Speaker key SPKR
Wait for the dial tone
Press the Feature key FEAT
Dial
Press the Speaker key SPKR
ATTENDANT POSITION USER GUIDE - 179