6.6 Shrouds
6.6.1 Replacing Rear Shroud
Removing Rear Shroud
1. Make sure mobility device is powered down.
2. Disengage top of rear shroud A from battery box B
by pulling up rear shroud.
3. Disengage keyholes C from battery box pegs D by
pulling up rear shroud.
4. Remove rear shroud from battery box, one side at a
time.
5. If lights are present, disconnect front lights connector
E and light power cable connector F from rear
lighting harness G inside of rear shroud.
1675507-A
B
A
C
Fig. 6-1 Seat assembly not shown for clarity.
Fig. 6-2
Service
D
21