Grandstream Networks UCM6102 User Manual page 155

Ring Time Out
Wrapup Time
Max Queue Length
Report Hold Time
Wait Time
Auto Record
Enable Destination
Default Destination
Agents

Click on to delete the call queue.

Click on "Agent Login Settings" to configure Agent Login Extension Postfix and Agent Logout
Extension Postfix. Once configured, users could log in the call queue as dynamic agent.
Firmware Version 1.0.7.11
log in. The default setting is disabled.
Configure the number of seconds an agent will ring before the call goes
to the next agent. The default setting is 15 seconds.
Configure the number of seconds before a new call can ring the queue
after the last call on the agent is completed. If set to 0, there will be no
delay between calls to the queue. The default setting is 15 seconds.
Configure the maximum number of calls to be queued at once. This
number does not include calls that have been connected with agents. It
only includes calls not connected yet. The default setting is 0, which
means unlimited. When the maximum value is reached, the caller will be
treated with busy tone followed by the next calling rule after attempting to
enter the queue.
If enabled, the UCM6100 will report (to the agent) the duration of time of
the call before the caller is connected to the agent. The default setting is
"No".
If enabled, users will be disconnected after the configured number of
seconds. The default setting is "No".
Note:
It is recommended to configure "Wait Time" longer than the "Wrapup
Time".
If enabled, the calls on the call queue will be automatically recorded. The
recording files can be accessed in Queue Recordings under web GUI-
>PBX->Call Features->Call Queue.
If enabled, the incoming call for the call queue will be routed to the
destination configured in the next field if none of the agents answers the
call after ringing for a time of "Ring Timeout".
Configure the call destination for the call to be routed to if no agent in this
call queue answers the call.
Select the available users to be the static agents in the call queue.
Choose from the available users on the left to the static agents list on the
right. Click on
UCM6100 Series IP PBX User Manual
to arrange the order.
Page 153 of 233