Change Log; Firmware Version 1.0.7.11; Firmware Version 1.0.6.11; Firmware Version 1.0.6.10 - Grandstream Networks UCM6102 User Manual

This section documents significant changes from previous versions of the UCM6100 user manuals. Only
major new features or major document updates are listed here. Minor updates for corrections or editing
are not documented here.

FIRMWARE VERSION 1.0.7.11


Added office time and holiday setting. [OFFICE TIME] [HOLIDAY]

Added new architecture for auto provisioning via Zero Config. [PROVISIONING]

Added Alert-info configuration for distinctive ringing on inbound route. [Table 42: Inbound Rule
Configuration Parameters]

Added SLA support to monitor FXO trunk. [SLA STATION]

Added Follow Me support. [FOLLOW ME]

Added One-Key Dial support. [ONE-KEY DIAL]

Added FXO Dial Delay option for analog trunk. [Table 36: Analog Trunk Configuration
Parameters]

Added Music On Hold selection per extension. [EXTENSIONS]

Added Call Forward Time Condition per extension. [EXTENSIONS]

Added custom prompt support for ring group announcement. [Table 49: Ring Group Parameters]

Added custom prompt support for paging/intercom group announcement. [Table 50:
Paging/Intercom Group Configuration Parameters]

Added options to delete voicemail and Fax files via cleaner. [CLEANER]

Added DTMF configuration per trunk. [VOIP TRUNKS]

Added call queue Music On Hold customization. [Table 51: Call Queue Configuration Parameters]

Added call queue destination support. [Table 51: Call Queue Configuration Parameters]

Added batch add blacklist file support. [BLACKLIST CONFIGURATIONS]

FIRMWARE VERSION 1.0.6.11


Added service check options under web UI->Maintenance->Troubleshooting->Service Check
page to regularly check Asterisk service.

FIRMWARE VERSION 1.0.6.10


Added static routes function. [STATIC ROUTES]
Firmware Version 1.0.7.11

CHANGE LOG

UCM6100 Series IP PBX User Manual Page 14 of 233