One-Key Dial; Figure 86: Configure One-Key Dial - Grandstream Networks UCM6102 User Manual
Ucm6100 series ip pbx
Hide thumbs
Also See for UCM6102:
- User manual (308 pages) ,
- Basic configuration manual (21 pages) ,
- Quick installation manual (17 pages)
Table of Contents
Advertisement
ONE-KEY DIAL
The UCM6100 supports One-Key Dial that allows users to call a certain destination by pressing one digit
0 to 9 on the keypad. This creates a system-wide speed dial access for all the extensions on the
UCM6100.
To enable One-Key Dial, on the UCM6100 web GUI, go to page PBX->Call Features->One-Key Dial.
Figure 86: Configure One-Key Dial
User should first decide a digit used for One-Key Dial and check the option "Enable Destination" for the
Then select a dial destination from "Default Destination". The supported destinations include
digit.
extension, voicemail, conference room, voicemail group, IVR, ring group, call queue, page group, fax,
DISA, Dial by Name and external number.
Firmware Version 1.0.7.11
UCM6100 Series IP PBX User Manual
Page 167 of 233
Advertisement
Table of Contents
Troubleshooting
