Traceroute; Analog Record Trace; Figure 134: Traceroute - Grandstream Networks UCM6102 User Manual
Ucm6100 series ip pbx
Hide thumbs
Also See for UCM6102:
- User manual (308 pages) ,
- Basic configuration manual (21 pages) ,
- Quick installation manual (17 pages)
Table of Contents
Advertisement
TRACEROUTE
Enter the target host in host name or IP address. Then press "Start" button. The output result will
dynamically display in the window below.
Figure 134: Traceroute
ANALOG RECORD TRACE
Analog record trace can be used to troubleshoot analog trunk issue, for example, the UCM6100 user has
caller ID issue for incoming call from Analog trunk. Users can access analog record trance under web
GUI->Maintenance->Troubleshooting ->Analog Record Trace.
Here is the step to capture trace:
1. Select FXO or FXS for "Record Ports". If the issue happens on FXO 1, select FXO port 1 to record
the trace.
2. Select "Record Direction".
3. Select "Record File Mode" to separate the record per direction or mix.
4. Click on "Start".
5. Make a call via the analog port that has the issue.
6. Once done, click on "Stop".
7. Click on "Download" to download the analog record trace.
Firmware Version 1.0.7.11
UCM6100 Series IP PBX User Manual
Page 231 of 233
Advertisement
Table of Contents
Troubleshooting
