Table 29: Create New Template; Figure 31: Edit Global Template - Grandstream Networks UCM6102 User Manual

Template Name
Description
Enabled

Click on to edit the global template.
The window for editing global template is shown in the following figure. In the "Options" field, after
entering the option name key word, the options containing the key word will be listed. Users could
then select the options to be modified and click on "Add Option" to add it into the global template.
The added options will show in the list. Users can then enter or select value for each option to be
used in the global template. On the left side of each added option, users can click on
this option from the template. On the right side of each option, users can click on
option value to the default value.
Click on "Save" to save this global template.
Firmware Version 1.0.7.11

Table 29: Create New Template

Create a name to identify this global template.
Provide a description for the global template. This is optional.
Check this option to enable the global template.

Figure 31: Edit Global Template

UCM6100 Series IP PBX User Manual
to remove
to reset the
Page 73 of 233