Table 53: Follow Me Settings; Table 54: Follow Me Options - Grandstream Networks UCM6102 User Manual


Once created, it will be displayed on the follow me web page list. Click on
configuration. Click on
The following table shows the Follow Me configuration parameters.
Enable
Music On Hold Class
Follow Me Numbers
New Follow Me Number
Dialing Order

Click on "Follow Me Options" to enable or disable the options listed in the following table.
Playback Incoming Status
Message
Record the Caller's Name
Playback Unreachable Status
Message
Firmware Version 1.0.7.11
to delete the Follow Me.

Table 53: Follow Me Settings

Configure to enable or disable Follow Me for this user.
Configure the Music On Hold class that the caller would hear while
tracking the user.
The added numbers are listed here. Click on
Click on to delete the number. Click on
Add a new Follow Me number which could be a 'Local Extension' or
'External Number'. The selected dial plan should have permissions to
dial the defined external number.
Select the order in which the Follow Me destinations will be dialed to
reach the user: ring all at once or ring one after the other.

Table 54: Follow Me Options

If enabled, the PBX will playback the incoming status message before
starting the Follow Me steps.
If enabled, the PBX will record the caller's name from the phone so it can
be announced to the callee in each step.
If enabled, the PBX will playback the unreachable status message to the
caller if the callee cannot be reached.
UCM6100 Series IP PBX User Manual
to edit the Follow Me
to arrange the order.
to add new numbers.
Page 166 of 233