Restore Configuration From Backup File; Table 85: Data Sync Configuration; Figure 128: Data Sync - Grandstream Networks UCM6102 User Manual

Enable Backup
Account
Password
Server Address
Backup Time
Before saving the configuration, users could click on "Test Connection". The UCM6100 will then try
connecting the server to make sure the server is up and accessible for the UCM6100.
Save the changes and all the backup logs will be listed on the web page.

RESTORE CONFIGURATION FROM BACKUP FILE

To restore the configuration on the UCM6100 from a backup file, users could go to Web GUI-
>Maintenance->Backup->Local Backup.

A list of previous configuration backups is displayed on the web page. Users could click on
desired backup file and it will be restored to the UCM6100.

If users have other backup files on PC to restore on the UCM6100, click on "Upload Backup File" first
and select it from local PC to upload on the UCM6100. Once the uploading is done, this backup file
will be displayed in the list of previous configuration backups for restore purpose. Click on
restore from the backup file.
Firmware Version 1.0.7.11

Figure 128: Data Sync

Table 85: Data Sync Configuration

Enable the auto backup function. The default setting is "No".
Enter the Account name on the SFTP backup server.
Enter the Password associate with the Account on the SFTP backup
server.
Enter the SFTP server address.
Enter 0-23 to specify the backup hour of the day.
UCM6100 Series IP PBX User Manual
of the
to
Page 226 of 233