Other operations are also available in interface status section:
Click on "Interfaces Status", the web page will redirect to ports configuration page which can also be
accessed via web GUI->PBX->Internal Options->Ports Config.
Click on
to refresh the interface status.
Click on [ + ] to expand the interface details.
Click on [ - ] to hide the interface details.
PARKING LOT
The UCM6100 supports call park using feature code. When there is call being parked, this section will
display the parking lot status.
Caller ID
Channel
Extension
Timeout
Firmware Version 1.0.7.11
LAN/WAN not configured.
LAN/WAN disconnected.
FXS/FXO connected.
FXS/FXO waiting.
FXS/FXO busy.
FXS/FXO not configured.
FXS/FXO disconnected.
Figure 104: Parking Lot Status
Table 77: Parking Lot Status
Display the caller ID who parks the call.
Display channel for the call park.
Display the parking lot number where the call is parked/retrieved.
Display timeout (in seconds) for the parked call. The status page will
dynamically update this timer from 120 seconds (default) to 0. When the timer
reaches 0, the caller who parks the call will be called back.
UCM6100 Series IP PBX User Manual
Page 202 of 233