Figure 37: Add P Value in Customize Device Settings
After the above configurations, save the changes and go back to web UI->PBX->Zero Config->Zero
Config page. Users could then click on
to send NOTIFY to the SIP end point device and trigger the
provisioning process. The device will start downloading the generated configuration file from the URL
contained in the NOTIFY message.
Figure 38: Device List in Zero Config
In this web page, users can also click on "Reset All Extensions" to reset the extensions of all the devices.
Firmware Version 1.0.7.11
UCM6100 Series IP PBX User Manual
Page 80 of 233