To add blacklist number in batch, click on
format is as below.
Note:
Users could also add a number to the Blacklist or remove a number from the Blacklist by dialing the
feature code for "Blacklist Add' (default: *40) and "Blacklist Remove" (default: *41) from an extension. The
feature code can be configured under Web GUI->PBX->Internal Options->Feature Codes.
Firmware Version 1.0.7.11
Figure 56: Blacklist Configuration Parameters
to upload blacklist file in csv format. The supported csv
Figure 57: Blacklist csv File
UCM6100 Series IP PBX User Manual
Page 130 of 233