Connect The Ucm6116; Safety Compliances; Figure 8: Ucm6116 Front View; Figure 9: Ucm6116 Back View - Grandstream Networks UCM6102 User Manual

CONNECT THE UCM6116

To set up the UCM6116, follow the steps below:
 Connect one end of an RJ-45 Ethernet cable into the LAN port of the UCM6116.
 Connect the other end of the Ethernet cable into the uplink port of an Ethernet switch/hub.
 Connect the 12V DC power adapter into the 12V DC power jack on the back of the UCM6116. Insert
the main plug of the power adapter into a surge-protected power outlet.
 Wait for the UCM6116 to boot up. The LCD in the front will show the device hardware information
when the boot process is done.
 Once the UCM6116 is successfully connected to network, the LED indicator for NETWORK in the
front will be in solid green and the LCD shows up the IP address.
 (Optional) Connect PSTN lines from the wall jack to the FXO ports; connect analog lines (phone and
Fax) to the FXS ports.

SAFETY COMPLIANCES

The UCM6100 series IP PBX complies with FCC/CE and various safety standards. The UCM6100 power
adapter is compliant with the UL standard. Use the universal power adapter provided with the UCM6100
package only. The manufacturer's warranty does not cover damages to the device caused by
unsupported power adapters.
Firmware Version 1.0.7.11

Figure 8: UCM6116 Front View

Figure 9: UCM6116 Back View

UCM6100 Series IP PBX User Manual Page 29 of 233