Figure 69: Ring Group Configuration - Grandstream Networks UCM6102 User Manual

Custom Prompt
Ring Timeout on Each Member
Auto Record
Enable Destination
Secret
Email Address
Firmware Version 1.0.7.11
to the highest level.
This option is to set a custom prompt for a ring group to announce to
caller. Click on 'Prompt', it will direct to the page PBX->Internal Options-
>Custom Prompt, where users could record new prompt or upload
prompt files.
Configure the number of seconds to ring each member. If set to 0, it will
keep ringing. The default setting is 30 seconds.
Note:
The actual ring timeout might be overridden by users if the phone has
ring timeout settings as well.
If enabled, calls on this ring group will be automatically recorded. The
default setting is No. The recording files can be accessed from web GUI-
>CDR->Recording Files.
If enabled, users could select extension, voicemail, ring group, IVR, call
queue, voicemail group as the destination if the call to the ring group has
no answer. Secret and Email address are required if voicemail is
selected as the destination.
Configure the password to access the ring group extension's voicemail.
Note:
The password has to be at least 4 characters.
Configure the Email address of the ring group extension's voicemail. If
"Attach Recordings to E-mail" is enabled from Web GUI->PBX-
>Voicemail->Voicemail Email Settings, the voicemail can be sent to
the ring group's Email address as attachment.

Figure 69: Ring Group Configuration

UCM6100 Series IP PBX User Manual Page 148 of 233