Cdr Api Configuration Files; Table 82: Cdr Api Configuration Files - Grandstream Networks UCM6102 User Manual


Click on to delete the recording file.

To sort the recording file, click on the title "Caller", "Callee" or "Call Time" for the corresponding
column. Click on the title again can switch the sorting mode between ascending order or descending
order.

CDR API CONFIGURATION FILES

The UCM6100 supports third party billing interface API for external billing software to access CDR on the
PBX. The API uses HTTPS to request the CDR data matching given parameters as configured on the
third party application. Before accessing the API, the administrators need enable API and configure the
access/authentication information on the UCM6100 first.
Enable Enable/Disable CDR API. The default setting is disabled.
TLS Bind Address Configure the IP address for TLS server to bind to. "0.0.0.0" means binding to all
interfaces. The port number is optional and the default port number is 8443. The IP
address must match the common name (host name) in the certificate so that the
TLS socket won't bind to multiple IP addresses. The default setting is 0.0.0.0:8443.
TLS Private Key Upload TLS private key. The size of the key file must be under 2MB. This file will be
renamed as 'private.pem' automatically.
TLS Cert Upload TLS cert. The size of the certificate must be under 2MB. This is the
certificate file (*.pem format only) for TLS connection. This file will be renamed as
"certificate.pem" automatically. It contains private key for the client and signed
certificate for the server.
TLS Authentication Configure the user name for TLS authentication. If not configured, authentication will
Name be skipped.
TLS Authentication
Configure the password for TLS authentication. This is optional.
Password
Permitted Specify a list of IP addresses permitted by CDR API. This creates an AIP-specific
access control list. Multiple entries are allowed.
For example, "192.168.40.3/255.255.255.255" denies access from all IP addresses
except 192.168.40.3.
The format of the HTTPS request for the CDR API is as below.
https://[UCM IP]:[Port]/cdrapi?[option1]=[value]&[option2]=[value]&...
By default, the port number for the API is 8443.
Firmware Version 1.0.7.11

Table 82: CDR API Configuration Files

UCM6100 Series IP PBX User Manual Page 215 of 233