Figure 32: Edit Model Template - Grandstream Networks UCM6102 User Manual


Click on to edit the model template.
The editing window for model template is shown in the following figure. In the "Options" field, enter
the option name key word, the option that contains the key word will be listed. User could then select
the option and click on "Add Option" to add it into the model template.
Once added, the option will be shown in the list below. On the left side of each option, users can click
on to remove this option from the model template. On the right side of each option, users can click
on to reset the option to the default value.

Click on Save when done. The model template will be displayed on web UI->PBX->Zero Config-
>Model Templates page.

to delete the model template or click on "Delete Selected Templates" to delete multiple
Click on
selected templates at once.

Click on "Toggle Selected Template(s)" to toggle the status between enabled/disabled for the selected
model templates.
Firmware Version 1.0.7.11

Figure 32: Edit Model Template

UCM6100 Series IP PBX User Manual Page 75 of 233