SAMPLE CONFIGURATION FOR FAX-TO-EMAIL
The following instructions describes a sample configuration on how to use Fax-to-Email feature on the
UCM6100.
1. Connect PSTN line to the UCM6100 FXO port.
2. Go to UCM6100 web GUI->Internal Options->Fax/T.38 page. Create a new Fax extension.
3. Go to UCM6100 web GUI->Basic/Call Routes->Analog Trunks page. Create a new analog trunk.
Please make sure "Fax Detection" is set to "No".
4. Go to UCM6100 web GUI->Basic/Call Routes->Inbound Routes page. Create a new inbound route
and set the default destination to the Fax extension.
5. Once successfully configured, the incoming Fax from external Fax machine to the PSTN line number
will be converted to PDF file and sent to the Email address Faxtest@ucm6100mycompany.com as
attachment.
Firmware Version 1.0.7.11
Figure 82: Create Fax Extension
Figure 83: Inbound Route to Fax Extension
UCM6100 Series IP PBX User Manual
Page 164 of 233