Grandstream Networks UCM6102 User Manual page 89

Auto Record
Skip Voicemail Password
Verification
Support Hot-Desking Mode
Disable This Extension
Music On Hold
User Settings
First Name
Last Name
Email Address
Language
SIP Settings
NAT
Firmware Version 1.0.7.11
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6100, which can be configured in the global ring timeout setting
under web GUI->Internal Options->IVR Prompt: General Preference.
The valid range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout
used is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default
setting is disabled. The recording files can be accessed under web GUI-
>CDR->Recording Files.
When user dials voicemail code, the password verification IVR is
skipped. If enabled, this would allow one-button voicemail access. By
default this option is disabled.
If enabled, SIP Password will accept only alphabet characters and digits;
AuthID will be changed to the same as Extension.
If selected, this extension will be disabled on the UCM6100.
Note:
The disabled extension still exists on the PBX but can't be used on the
end device.
Select which Music On Hold class to suggest to extension when putting it
on hold.
Configure the first name of the user. The first name can contain
characters, letters, digits and _.
Configure the last name of the user. The last name can contain
characters, letters, digits and _.
Fill in the Email address for the user. Voicemail will be sent to this Email
address.
Select the voice prompt language to be used for this extension. The
default setting is "Default" which is the selected voice prompt language
under web GUI->PBX->Internal Options->Language. The dropdown list
shows all the current available voice prompt languages on the UCM6100.
To add more languages in the list, please download voice prompt
package by selecting "Check Prompt List" under web GUI->PBX-
>Internal Options->Language.
Use NAT when the UCM6100 is on a public IP communicating with
UCM6100 Series IP PBX User Manual Page 87 of 233