Figure 80: Configure Extension For Fax Machine; Figure 81: Configure Inbound Rule For Fax - Grandstream Networks UCM6102 User Manual

Figure 80: Configure Extension for Fax Machine

7. Go to web GUI->PBX->Basic/Call Routes->Inbound Routes page.
8. Create an inbound route to use the Fax analog trunk. Select the created extension for Fax machine in
step 4 as the default destination.

Figure 81: Configure Inbound Rule for Fax

Now the Fax configuration is done. When there is an incoming Fax calling to the PSTN number for the
FXO port, it will send the Fax to the Fax machine.
Firmware Version 1.0.7.11 UCM6100 Series IP PBX User Manual Page 163 of 233