5. After 9 devices are powered up and connected to the LAN network, use "Auto Discover" function or
"Create New Device" function to add the devices to the device list on web UI->PBX->Zero Config-
>Zero Config.
6. On web GUI->PBX->Zero Config->Zero Config page, users could identify the devices by their MAC
addresses or IP addresses displayed on the list. Click on
7. For each of the 5 phones used by English speaking customer support, in "Basic" settings select an
available extension for account 1 and click on "Save". Then click on "Advanced" settings tab to bring
up the following dialog. Users will see the English support template is applied since this is the default
model template. A preview of the device settings will be listed on the right side.
8. For the 3 phones used by Spanish support, in "Basic" settings select an available extension for
account 1 and click on "Save". Then click on "Advanced" settings tab to bring up the following dialog.
Firmware Version 1.0.7.11
Figure 40: Zero Config Sample - Device Preview 1
UCM6100 Series IP PBX User Manual
to edit the device settings.
Page 82 of 233