Alert Log; Alert Contact; Cdr; Figure 113: System Events->Alert Log - Grandstream Networks UCM6102 User Manual


Detect Cycle: The UCM will detect the event at each cycle based on the specified time. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
Click on the switch
also select the checkbox for each event and then click on button "Alert On", "Alert Off", "Email Notification
On", "Email Notification Off" to control the alert and Email notification configuration.

ALERT LOG

Under Web GUI->Status->System Events->Alert Log, system messages are listed when the alert is
triggered for the configured system events. The following picture shows disk usage alert log. We can tell
the detect cycle for the disk usage is 10 minutes and the disk usage is restored to normal after the
administrator cleans up the disk storage below the threshold.

ALERT CONTACT

Users could add administrator's Email address under Web GUI->Status->System Events->Alert
Contact to send the alert notification to. Up to 10 Email addresses can be added.

CDR

A Call Detail Record (CDR) is a data record produced by telephone exchange activities or other
telecommunications equipment documenting the details of a phone call that passed through the PBX. The
CDR is composed of the following data fields on the UCM6100.

Start Time. Format: 2013-03-27 16:47:03.

Call From. Format: "John Doe"<6012>.

Call To. Format: 6005.

Answered By. Format: 6005.

Call Time. Format: 0:00:10.
Firmware Version 1.0.7.11
to turn on/off the alert and Email notification for the event. Users could
Figure 113: System Events->Alert Log
UCM6100 Series IP PBX User Manual Page 209 of 233