Static Routes; Table 9: Ucm6108/Ucm6116 Network Settings->Basic Settings; Table 10: Ucm6100 Network Settings->802.1X - Grandstream Networks UCM6102 User Manual

Preferred DNS Server
IP Method
IP Address
Subnet Mask
Gateway IP
DNS Server 1
DNS Server 2
User Name
Password
Layer 2 QoS
802.1Q/VLAN Tag
Layer 2 QoS 802.1p
Priority Value
802.1X
The UCM6100 provides users 802.1X settings for LAN port and WAN port (WAN port: UCM6102 only).
802.1X Mode
Identity
MD5 Password
802.1X Certificate
802.1X Client
Certificate

STATIC ROUTES

The UCM6100 provides users static routing capability that allows the device to use manually configured
routes, rather than information only from dynamic routing or gateway configured in the UCM6100 web
Firmware Version 1.0.7.11
Table 9: UCM6108/UCM6116 Network Settings->Basic Settings
Enter the preferred DNS server address.
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
Enter the IP address for static IP settings.
Enter the subnet mask address for static IP settings.
Enter the gateway IP address for static IP settings.
Enter the DNS server 1 address for static IP settings.
Enter the DNS server 2 address for static IP settings.
Enter the user name to connect via PPPoE.
Enter the password to connect via PPPoE.
Assign the VLAN tag of the layer 2 QoS packets for LAN port. The default value
is 0.
Assign the priority value of the layer 2 QoS packets for LAN port. The default
value is 0.
Table 10: UCM6100 Network Settings->802.1X
Select 802.1X mode. The default setting is "Disable". The supported 802.1X
mode are:

EAP-MD5

EAP-TLS

EAP-PEAPv0/MSCHAPv2
Enter 802.1X mode identity information.
Enter 802.1X mode MD5 password information.
Select 802.1X certificate from local PC and then upload.
Select 802.1X client certificate from local PC and then upload.
UCM6100 Series IP PBX User Manual Page 41 of 233