MANAGE DEVICES
The device manually created or discovered from Auto Discover will be listed in the web UI->PBX->Zero
Config->Zero Config page. Users can see the devices with their MAC address, IP address, vendor,
model and etc.
Click on
to edit the device configuration.
A new dialog will be displayed for the users to configure "Basic" settings and "Advanced" settings.
"Basic" settings have the same configurations as displayed when manually creating a new device,
i.e., account, line key and MPK settings; "Advanced" settings allow users to configure more details in
a five-level structure.
A preview of the "Advanced" settings is shown in the following figure. There are five levels
configurations as described in (1) (2) (3) (4) (5) below, with priority from the lowest to the highest. The
configurations in all levels will take effect for the device. If there are same options existing in different
level configurations with different value configured, the higher level configuration will override the
lower level configuration.
Firmware Version 1.0.7.11
Figure 34: Manage Devices
UCM6100 Series IP PBX User Manual
Page 77 of 233