Figure 35: Edit Device - Grandstream Networks UCM6102 User Manual

(1) Global Policy
This is the lowest level configuration. The global policy configured in web UI->PBX->Zero
Config->Global Policy will be applied here. Clicking on "Modify Global Policy" to redirect to page
PBX->Zero Config->Global Policy.
(2) Global Templates
Select a global template to be used for the device and click on
templates can be selected and users can arrange the priority by adjusting orders via
All the selected global templates will take effect. If the same option exists on multiple selected
global templates, the value in the template with higher priority will override the one in the template
with lower priority. Click on
(3) Default Model Template
Default Model Template will be applied to the devices of this model. Default model template can
be configured in model template under web UI->PBX->Zero Config->Model Templates page.
Please see default model template option in
Firmware Version 1.0.7.11

Figure 35: Edit Device

to remove the global template from the selected list.
[Table 30: Create New Model Template]
UCM6100 Series IP PBX User Manual
to add. Multiple global
and .
.
Page 78 of 233