Track - BOMBARDIER 1980 Shop Manual

TRACK TYPE APPLICATION
Refer to the "Technical Data" section 02, (05-06)
INSPECTION
Visually Inspect track for cuts and abnormal wear. Inspect
track for broken rods. If excessive damage
I'S eVident
and
rods are broken, replace track. Inspect track for damaged
or missing Inserts, Replace damaged Insert(s).
•
WARNING: Never run a vehicle with a damaged
track,
REMOVAL
Elan, Spirit
Remove the following Items:
- tool box
- chaincase access plug
- drive axle cotter pin and washer
- suspension
- rear axle
- the two drive axle seals
- end bearing hOUSing
- drive axle
- track
SECTION 06
SUB-SECTION 05, (TRACK)
Citation, Mirage
Remove the following Items:
- pulley guard and drive belt
- air silencer
- Injection all reservOir (If so eqUipped)
TRACK
- battery and battery support (if so equipped)
- chaincase cover, sprockets and chain
- chaincase
- both drive axle seals
- suspension
- speedometer, angle drive (If so equipped)
- drive axle (outwards from chaincase side)
- center Idler assembly
- track
Everest, Futura, Blizzard
Grand Prix Special, Super Sonic, Ultra Sonic
Remove the following Items:
- belt guard and drive belt
- driven pulley assembly
- speedometer cable and angle drive (if applicable)
- chaincase cover, sprockets and chain
- drive axle oil seals
Release track tension (loosen the two rear tenSion bolts).
- Remove the suspension
- end bearing hOUSing
- drive axle assembly
- suspension cross shaft
- track
INSTALLATION:
All models:
Reverse the removal procedure
(TRACK), PAGE 1