BOMBARDIER 1980 Shop Manual page 248

REMOVAL
Remove the following items:
- belt guard and drive belt
- injection oil reservoir
- air silencer
- battery (electric start models only)
- chaincase cover
- upper chaincase sprocket
Open the bearing cage, lift up and pullout the counter-
shaft assembly.
Remove the driven pulley assembly from the countershaft.
+
WARNING: It may necessary to loosen the brake
adjustment in o-der to easily lift the countershaft.
Always check that the brake disc is correctly installed
between the brake pads and that the brake is well
adjusted, Check brake light operation.
Brake light u
switch
I\~
Brake pads
==-
\ t .
Brake disc
=-11 11.
SECTION 05
SUB-SECTION 04 (DRIVEN PULLEY)
(DRIVEN PULLEY). PAGE 3