BOMBARDIER 1980 Shop Manual page 300

7. Rear axle
2. Grease hlting
3. Sprocket
4. Mobile flange
5. Bolt (flange)
6. Nut (flange)
REMOVAL
CD
7. Link plate
8. Bearing
9. Oil seal
70. Eye bolt
7 7. Hardener washer
72. Adjuster bolt
Lift and block rear of vehicle off the ground.
Remove the link plate spnng lock nuts and retainer
washers.
USing link plate spring lever (See Tool Section). unlock
link plate springs.
Remove track adjuster bolts. eye bolts. hardener washers
and adjuster sleeves.
Withdraw rear axle from vehicle.
DISASSEMBLY & ASSEMBLY
CD
Idler wheels and sprockets are factory riveted. When
separation
IS
necessary, remove rivets securing idler with
a
til
dia. bit.
7
SECTION 06
SUB-SECTION 03, (REAR AXLE)
REAR AXLE
~ 13~
I@I,
I
11,~~ ,~
I
10
73. Washer (except for Alpme)
74. Sleeve
75. Link plate spring
76. Retainer washer
77. Lock nut
To remove sprocket. apply liquid soap or petroleum Jelly
on sprocket bead and flange then with two (2) screw-
d"vers (round bars). pass the sprocket over flange. Re-
verse change-over procedure to install sprocket.
f{(
(REAR AXLE). PAGE 1