BOMBARDIER 1980 Shop Manual page 50

SECTION 03
SUB-SECTION 02 (ENGINES)
ENGINE SUPPORT AND MUffLER
REMOVAL FROM VEHICLE
Remove or disconnect the followings then hft engine from
vehicle.
- Pulley guard and drive belt
- Muffler
- Throttle cable and Intake silencer
- Fuel lines
- Electrical connectors
- Hood retaining cable
- Bolts (3) securing engine support to chassis
DISASSEMBLY & ASSEMBLY
@@Torque to 21 N"m (15 ft-Ibs).
@@Torque to 55 N"m (40 ft-Ibs).
INSTALLATION ON VEHICLE
To install engine on vehicle, inverse removal procedure.
However, pay attention to the followings.
.. Check tightness of engine mount nuts, and drive pulley
bolt .
.. After throttle cable installation, check carburetor max-
imum throttle slide opening .
.. Check pulley alignment.
(277 ENGINE TYPE), PAGE 2