SECTION 06
SUB-SECTION 05, (TRACK)
Alignment (Slide Suspension)
With rear of vehicle supported off the ground. start engine
and allow the track to rotate slowly.
Check that track is well centered and turns evenly. To
correct. stop engine then loosen the lock nuts and tighten
the adjuster bolt on Side where gUides are closest to
slide. Tighten lock nuts and recheck alignment.
<
Guide ------------...
~Shde
__
~
=1
F
d,~::~e
--11--
•
WARNING: Before checking track alignment, en-
sure that the track is free of all particles which
could be thrown out while track is rotating. Keep hands,
tools, feet and clothing clear of track.
(TRACK). PAG E 4