Elite
I. Pulley guard
2. Wing nut
3. Washer
4. Rubber spacer
REMOVAL
Lift and support the engine compartment hood. Unscrew
the wing nuts (A) located behind the drive pulley. the
wing nut (8) on top of pulley guard and the wing nut
(C)
at the pulley guard center support.
'-----/
)
SECTION 05
SUB-SECTION 01 (PULLEY GUARD)
/ '
~
3
®
4
AS
l~
o
Disengage guard with a forward movement and remove
complete assembly.
+
WARNING: Engine should be running only when
pulley guard is secured in place and cab is closed.
INSPECTION
Check general condition of parts. If damaged. replace.
(PULLEY GUARD). PAGE 5