BOMBARDIER 1980 Shop Manual page 272

SECTION 05
SUB-SECTION 07 (CHAINCASE)
REMOVAL
Remove:
- suspension
- injection oil reservoir (if applicable)
- battery and battery holder (if applicable)
- chaincase cover and drain the oil
Pry out drive axle oil seal from chaincase. Remove
cotter
pins, nuts, washers, sprockets and chain. Remove bolts
and nuts securing chaincase to frame.
INSPECTION
Visually inspect the chain for cracked, damaged or miss-
ing link rollers. Inspect for defective bearing, sprockets.
DISASSEMBLY & ASSEMBLY
Remove the oil seal, snap ring and bearing from the
chaincase.
INSTALLATION
Install the chaincase to the frame (do not tighten). Position
the drive axle into location.
Prior to lower sprocket installation ensure that the
spacer@is on the drive axle.
Reinstall the sprockets, chain, flat washers.
@@Reinstall spring washer and slotted nut, torque to
10 Nom (7 ft-Ibs).
@Install new cotter pin.
@Reinstall snap ring (lower sprocket).
Reinstall the chaincase cover.
Refill with chaincase oil.
(CHAINCASE), PAGE 2