Allowing/Prohibiting Jumbo Fame On An Ethernet Port; Setting Port Alias On An Ethernet Port; Setting Broadcast Storm Suppression On An Ethernet Port - Zte ZXR10 5900 Series User Manual

Step Command
1
interface <port-name>
ZXR10(config)#
2
ZXR10(config-gei_1/x)#
le}
Step Command
1
interface <port-name>
ZXR10(config)#
2
ZXR10(config-gei_1/x)#
Step Command
1 interface <port-name>
ZXR10(config)#
2
ZXR10(config-gei_1/x)#
Allowing/Prohibiting Jumbo Fame on
an Ethernet Port
jumbo-frame{enable|disab
By default, maximum fame allowed on an Ethernet port is 1560-
byte long and jumbo frames are prohibited. Maximum frame al-
lowed on an Ethernet port is 9216-byte long when jumbo frame
are permitted.

Setting Port Alias on an Ethernet Port

byname <by-name>
Port alias is set to uniquely identify a port with a mnemonic name.
Port can be accessed with its alias instead of the port name.
Setting Broadcast Storm Suppression
on an Ethernet Port
broadcast-limit<value>
Broadcast traffic through an Ethernet port can be limited. Broad-
cast packets are dropped when the traffic exceeds the limit so that
the broadcast traffic through the Ethernet port is kept in a reason-
able range. This effectively suppresses broadcast storm, helps
avoid congestion and ensures normal provisioning of network ser-
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 Interface Configuration
Function
This enters interface
configuration mode.
This allows/prohibits jumbo
fame on an Ethernet port.
Function
This enters interface
configuration mode.
This sets port alias on an
Ethernet port.
Function
This enters interface
configuration mode.
This sets broadcast storm
suppression on an Ethernet
port.
33