Configuring Traffic Shaping; Configuring Queue Bandwidth Limit - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Example
Command
ZXR10(config-gei_1/x)#
<rate-value> burst-size <value>
Example
Command
ZXR10(config-gei_1/x)#
<queue-no>{max-datarate-limit <max-daterate-vlaue
>|min-gua-datarate <min-datarate-vlaue>}
74 Confidential and Proprietary Information of ZTE CORPORATION
Parameter mode <mode>: blind indicates Color-Blind mode and
aware indicates Color-Aware mode.
Parameter drop-yellow:
packets will be forwarded by default.
Parameter forward-red: indicates forwarding red packets; pack-
ets will be forwarded by default.
Parameter remark indicates remarking service parameter of pack-
ets with color:
� remark-red-dp: Remark drop precedence of red packets, pri-
ority parameter includes high, medium and low.
� remark-red-dscp: Remark DSCP priority of red packets, pri-
ority parameter is 0~63.
� remark-yellow-dp: Remark yellow packet dp to parameter
of high, medium or low.
�
remark-yellow-dscp:Remark yellow packet's dscp value
from 0 to 63 and one value can be chosen..
This example shows the traffic policy of packets sent to the desti-
nation IP address of 168.2.5.5 on port of gei_1/1 and bandwidth
is set to 10M.
ZXR10(config)#acl extended number 100
ZXR10(config-ext-acl)#rule 1 permit ip any
168.2.5.5 0.0.0.0
ZXR10(config-ext-acl)#exit
ZXR10(config)# traffic-limit in rule-id 1 cir
10000 cbs 2000 pir 10000 pbs 2000 mode blind
ZXR10(config)#interface gei_1/1
ZXR10(config-gei_1/1)#ip access-group 100 in

Configuring Traffic Shaping

traffic-shape data-rate
This example shows the conduction of traffic shaping on port
gei_1/1 and configures the port rate as 20 M.
ZXR10(config)#interface gei_1/1
ZXR10(config-gei_1/1)#traffic-shape data-rate

Configuring Queue Bandwidth Limit

traffic-shape queue
indicates dropping yellow packets;
Function
This configures traffic shaping
for the port.
20000 burst-size 4
Function
This configures queue maximum
and minimum bandwidth limit.