System Management; File System - Zte ZXR10 5900 Series User Manual

3
C h a p t e r

System Management

Table of Contents
File System.......................................................................17
FTP/TFTP Overview ............................................................19
Backing up Data and Restoring Data ....................................22
Software Version Upgrade...................................................23
Configuring System Parameters...........................................26
Viewing System Information ...............................................28

File System

Introduction to File System
In ZXR10 5900/5200, FLASH is used as the major storage device
for storing version files and configuration files. Operations, such
as version upgrading and configuration saving, must be conducted
in flash.
There are three directories in Flash by default.
1. IMGSystem mapping files (that is, image files) are stored un-
der this directory. The extended name of the image files is
.zar. The image files are dedicated compression files. Version
upgrade means to change the corresponding image files under
the directory.
2. CFGThis directory is for saving configuration files, whose name
is startrun.dat. Information is saved in the Memory when using
command to modify the switch configuration. To prevent the
configuration information loss at the time of switch restart, use
write command to write the information in the Memory into
FLASH, and save the information in the startrun.dat file. When
there is a need to clear the old configuration in the switch to
reconfigure data, use delete command to delete startrun.dat
file, then restart the switch.
3. DATAThis directory is for saving log.dat file which records alarm
information.
Confidential and Proprietary Information of ZTE CORPORATION 17