Zte ZXR10 5900 Series User Manual page 136

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Command
logging mode <mode>[<interval>]
ZXR10(config)#
Command
logging console <level>[filter
ZXR10(config)#
map-name]
Command
logging level <level>
ZXR10(config)#
Command
logging ftp <level>[mng]<ftp-server><us
ZXR10(config)#
ername><password>[<filename>]
Command
logging trap <level><community>[mng
ZXR10(config)#
]<host-address>
Command
logging filesavetime {everyday
ZXR10(config)#
<hh:mm:ss>|interval <hh:mm:ss>|month
<monthday><hh:mmm:ss>|week <weekday><hh:mm
:ss>}[mng]<ftp sever><username><password><alarm
file prefix>
122 Confidential and Proprietary Information of ZTE CORPORATION
4. To set the log level displayed on the console interface of telnet
interface, use the following command.
5. To set the log level saved in log buffer, use the following com-
mand.
6. To set the background FTP log server parameter, use the fol-
lowing command.
7. To set parameters of alarm information which is sent to trap
server, use the following command.
8. To set parameters to pack information in alarm buffer to file
and send it to ftp server, use the following command.
9. To set background syslog server parameters, use the following
command.
Function
This sets log clearance mode.
Function
This sets the log level displayed
on the console interface of telnet
interface.
Function
This sets the log level saved in
log buffer.
Function
This sets the background FTP
log server parameter.
Function
This sets parameters of alarm
information which is sent to trap
server.
Function
This sets parameters to pack
information in alarm buffer to
file and send it to ftp server.