Zte ZXR10 5900 Series User Manual page 130

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Command
snmp-server view <view-name><subtree
ZXR10(config)#
-id>{included|excluded}
Command
snmp-server contact <mib-syscontact-
ZXR10(config)#
text>
Command
snmp-server location <mib-syslocation-
ZXR10(config)#
text>
Command
snmp-server enable trap [<notification-t
ZXR10(config)#
ype>]
Command
snmp-server host [mng]<ip-address>[tra
ZXR10(config)#
p|inform][version {1|2c|3 {auth|noauth|priv}}]<com
munity-name>[udp-port <udp-port>][...<trap-type>]
116 Confidential and Proprietary Information of ZTE CORPORATION
Both read-only and read-write are limited by the view. Oper-
ations can only be conducted in the permitted view range. If
parameter view is omitted use default view and use parameter
ro if ro/rw are omitted.
2. To define a SNMPv2 view, use the following command.
3. To set the system handler contract mode (SysContact) of the
MIB object, use the following command.
SysContact is a management variable of the system group in
the MIB II and it records ID and contact mode of the relevant
personnel of the managed equipment.
4. To set the location (SysLocation) of the MIB object, use the
following command.
SysLocation is a management variable of the system group in
the MIB II and is used to indicate the location of the managed
equipment.
5. To set the types of TRAP allowed for sending, use the following
command.
TRAP is un-requested information sent by the managed equip-
ment initiatively to the NMS and is used to report some emer-
gent events.
6. To set the TRAP destination host, use the following command.
Function
This defines a SNMPv2 view.
Function
This sets the system handler
contract mode (SysContact) of
the MIB object.
Function
This sets the location
(SysLocation) of the MIB
object.
Function
This sets the types of TRAP
allowed for sending.
Function
This sets the TRAP destination
host.