Rmon Configuration Example - Zte ZXR10 5900 Series User Manual

All gigabit-port intelligent routing switch
Hide thumbs Also See for ZXR10 5900 Series:
Table of Contents

Advertisement

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Command
show rmon [alarms][events][history][st
ZXR10(config)#
atistics]
120
Confidential and Proprietary Information of ZTE CORPORATION

RMON Configuration Example

1. This example shows how to configure and start statistics con-
trol entries of the RMON.
ZXR10(config)#interface gei_1/1
ZXR10(config-gei_1/1)#rmon collection statistics 1 owner rmontest
ZXR10(config-gei_1/1)#
Assume that n computers are linked to the port gei_1/1 and
when these computers communicate on the sub-network. We
can view traffic statistics data through NMS software and view
RMON statistics information with the show command.
ZXR10#show rmon statistics
EtherStatsEntry 1 is active, and owned by rmontest
Monitors ifEntry.1.1 which has
Received 60739740 octets, 201157 packets,
1721 broadcast and 9185 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 32 collisions.
# of dropped packet events (due to lack of resources): 511
# of packets received of length (in octets):
64: 92955, 65-127: 14204, 128-255: 1116,
256-511: 4479, 512-1023: 85856, 1024-1518:2547
ZXR10#
2. This example shows how to configure and start history control
entries of the RMON.
ZXR10(config)#interface gei_1/1
ZXR10(config-gei_1/1)#rmon collection history 1 bucket 10 interval
10 owner rmontest
ZXR10(config-gei_1/1)#
View RMON history information with the show command.
ZXR10#show rmon history
Entry 1 is active, and owned by rmontest
Monitors ifEntry.1.1 every 10 seconds
Requested # of time intervals, ie buckets, is 10
Granted # of time intervals, ie buckets, is 10
Sample # 1 began measuring at 00:11:00
Received 38346 octets, 216 packets,
0 broadcast and 80 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions.
# of dropped packet events is 0
Network utilization is estimated at 1
3. This example shows how to configure and start alarm control
entries of the RMON.
ZXR10(config)#rmon alarm 1 system.3.0 10 absolute
rising-threshold 1000 1
ZXR10(config)#
View RMON alarm information with the show command.
ZXR10#show rmon alarm
Alarm 1 is active, owned by rmontest
Monitors system.3.0 every 10 seconds
Taking absolute samples, last value was 54000
Rising threshold is 1000, assigned to event 1
Function
This displays RMON
configuration and relevant
information.
Falling-threshold 10 1 owner rmontest

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents