Zte ZXR10 5900 Series User Manual page 99

Step Command
1
ZXR10(config-ip-pool)#
2
ZXR10(config-ip-pool)#
Step Command
1
ZXR10(config-ip-pool)#
_ip_addr>]
2
ZXR10(config-ip-pool)#
ig_ip_addr>]
Step Command
1
ZXR10(config-ip-pool)#
_mask>
2
ZXR10(config-ip-pool)#
et_mask>
conflict-time <time>
no conflict-time
3. To configure reserving address in IP pool or delete the original
configuration, use the following commands.
exclude <low_ip_addr>[<hig
no exclude <low_ip_addr>[<h
4. To add all suitable ip addresses to ip pool or delete the corre-
sponding IP address range, use the following commands.
network <net_number><net
no network <net_number><n
5. To configure IP pool range or delete corresponding IP address
range , use the following commands.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 9 DHCP Configuration
Function
This configures conflict time
in IP pool.
<time> conflict time value,
1~18000 minutes, the default
value is 30 minutes.
This deletes the original
configuration and restores
default time value.
Function
This configures reserving
address in ip pool.
<low_ip_addr >the begin low
address of reserving address
or a specific address.
<Hig_ip_add r> the highest
address of reserving address
range. This command
parameter must be a subset
of this address pool.
This deletes the original
configuration.
<low_ip_addr >the begin low
address of reserving address
or a specific address.
<Hig_ip_add r> the highest
address of reserving address
range. This command
parameter must be a subset
of this address pool.
Function
This adds all suitable IP
addresses to IP pool.
<net_numberr > a specific
subnet network number,
<net_maskr > subnet mask.
This deletes corresponding IP
address range configuration.
<net_numberr > a specific
subnet network number,
<net_maskr > subnet mask.
85