Configuring Poe - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Step Command
1
ZXR10（config-if）#
2
ZXR10（config-if）#
| 4.0 | ext.18| ext.27|ext.30.0]
3
ZXR10（config-if）#
186 Confidential and Proprietary Information of ZTE CORPORATION
F 42 POE P
IGURE OWER

Configuring PoE

poe enable
poe pd-max-power [15.4 | 7.0
poe priority [critical | high | low]
S
UPPLY
Function
This enables interface PoE
function.
The default is disabled.
This configures port maximum
power.
This command only can be
used when this interface
doesn't be enabled PoE
function.
The default is 15.4.
This configures interface
priority.
This command only can be
used when this interface
doesn't be enabled PoE
function.
The default is low.