Zesr And Zesr+ Hybrid Configuration Example - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
ZESR and ZESR+ Hybrid
Configuration Example
F 35 ZESR+ ZESR H N T F
IGURE AND YBRID ETWORKING OPOLOGY IGURE
Figure 35 is typical ZESR+ and ZESR hybrid networking topology
figure. Node ZXR10-2 , ZXR10-3 and ZXR10-1 form double nodes
double uplinks, that is ZESR+. Also three nodes form a main loop
virtually. Node ZXR10-2, ZXR10-3 and ZXR10-4 form a level 1seg
1 secondary ring, that is ZESR.
Node 1 configuration:
//as a normal switch, the major function is to
transparently transmit data package
//VLAN information need to be configured.
(port with tagged belongs to ctrl-vlan)
//close port broadcast and unknown unicast suppression
//connect ZXR10-3
ZXR10_S1(config)#interface gei_1/1
//configure interface working mode as auto negotiation
ZXR10_S1(config-gei_1/1)#negotiation auto
ZXR10_S1(config-gei_1/1)#switchport mode trunk
ZXR10_S1(config-gei_1/1)#switchport trunk vlan 100-200
ZXR10_S1(config-gei_1/1)#switchport trunk vlan 4000
ZXR10_S1(config-gei_1/1)#exit
//connect ZXR10-2
ZXR10_S1(config)#interface gei_1/2
//configure interface working mode as auto negotiation
ZXR10_S1(config-gei_1/2)#negotiation auto
ZXR10_S1(config-gei_1/2)#switchport mode trunk
ZXR10_S1(config-gei_1/2)#switchport trunk vlan 100-200
ZXR10_S1(config-gei_1/2)#switchport trunk vlan 4000
ZXR10_S1(config-gei_1/2)#exit
Node 2 configuration:
168 Confidential and Proprietary Information of ZTE CORPORATION