Zte ZXR10 5900 Series User Manual page 38

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
24 Confidential and Proprietary Information of ZTE CORPORATION
to that of the management Ethernet port of the switch; set the
subnet mask and FTP user name and password pair. After the
modification, the prompt ZXR10 Boot: appears.
[ZXR10 Boot]:c
'.' = clear field;
Boot Location [0:Net,1:Flash] : 0
/*0 means booting from the background FTP, 1 means botting from Flash*/
Port Number
Client IP [0:bootp]: 168.4.168.168
/*Management Ethernet port address*/
Netmask: 255.255.0.0
Server IP [0:bootp]: 168.4.168.89
/*Background FTP server address*/
Gateway IP: 168.4.168.168
/*Management Ethernet port address*/
FTP User: target
/*FTP user name target*/
FTP Password:
/*Password of target*/
FTP Password Confirm:
Boot Path: zxr10.zar
Enable Password:
Enable Password Confirm:
[ZXR10 Boot]:
4. Type @, and press ENTER. Then the system automatically boot
from the background FTP server.
[ZXR10 Boot]:@
Loading... get file zxr10.zar[15922273] successfully!
file size 15922273.
/*Omitted*/
**********************************************************
Welcome to ZXR10 5928 Switch of ZTE Corporation
**********************************************************
ZXR10>
5. If the system starts successfully, the user can use the show
version command to check whether the new version is running
in the memory. If not, booting from the background server
failed. The user must repeat steps 1 to 5.
6. Delete the old version file (zxr10.zar) from the Flash's IMG
directory with the delete command. If there is enough space
in the Flash, the user can reserve the old version with another
name.
7. Copy the new version file on the background FTP server to the
Flash's IMG directory with the filename as zxr10.zar.
i. Set temporary Vlan interface which is interworking with the
host (suppose IP address is 168.4.168.1).
ii. Set the host
168.4.168.89) in the same network segment that Vlan
interface ip address is in.
connects belongs to the vlan and can ping through Vlan
ip address.
iii. Use copy command at the privileged mode.
ZXR10#copy ftp: //168.4.168.89/zxr10.zar@target:target
flash: /img/zxr10.zar
Starting copying file
.................................................................
.................................................................
......................................
file copied successfully.
ZXR10#
'-' = go to previous field;
: 24
/*Default/
/*Default*/
/*Default*/
ip address (suppose
The interface which host
^D = quit
ip address is