Enabling/Disabling Auto-Negotiation On An Ethernet Port; Configuring Automatic Negotiation Notification On An Ethernet Port - Zte ZXR10 5900 Series User Manual

Step Command
1
interface <port-name>
ZXR10(config)#
2
ZXR10(config--gei_1/x)#
negotiation auto
Command
ZXR10(config-gei_1/x) #
[10|100]]
Enabling/Disabling Auto-Negotiation
on an Ethernet Port
negotiation auto/ no
Enable auto-negotiation on an Ethernet port when GE work on
1000M.
Configuring Automatic Negotiation
Notification on an Ethernet Port
negotiation auto [ speed
When working mode of PHY is electrical interface, GE, FE, 10M,
half-duplex and full-duplex can be set if it can be notified.
When working mode of PHY is optical port, only half-duplex and
full-duplex can be set if it can be notified. The notification of speed
can't be set.
Description:
negotiation auto speed 100
negotiation auto speed 10
negotiation auto
no negotiation auto
The four are in mutual exclusive relationship.
After configuring nego auto speed 100|10, speed and duplex of
port are not configured and only can be adaptive.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 Interface Configuration
Function
This enters interface
configuration mode.
This enables/disables
auto-negotiation on an
Ethernet port.
Function
This configures automatic
negotiation notification on an
Ethernet port to 10M or 100M.
31