Zte ZXR10 5900 Series User Manual page 111

Step Command
1 ip dhcp relay security client
ZXR10(config)#
server-id <ip-address>
2 no ip dhcp relay security client
ZXR10(config)#
server-id
Step Command
1
ip dhcp relay snooping enable
ZXR10(config)#
2 no ip dhcp relay snooping enable
ZXR10(config)#
Step Command
1
ZXR10(config-if-vlanX)#
packet reply
2
ZXR10(config-if-vlanX)#
packet reply
Step Command
1
ZXR10(config-if-vlanX)#
packet request
2
ZXR10(config-if-vlanX)#
packet request
9. To enable DHCP Relay Snooping, use the following command.
10. To enable DHCP network packet that all reply on the interface,
use the following command.
ip dhcp relay snooping
no ip dhcp relay snooping
11. To enable DHCP network packet that all request on the inter-
face, use the following command.
ip dhcp relay snooping
no ip dhcp relay snooping
12. To enable the interface as DHCP Relay trust or disable the in-
terface as DHCP Relay trust, use the following command.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 9 DHCP Configuration
Function
This configures DHCP client
server-id that DHCP Relay
response. <ip-address>
server-id ip addressin dotted
decimal notation.
This cancels DHCP client
server-id that DHCP Relay
responses.
Function
This enables DHCP Relay
Snooping.
DHCP Relay Snooping is
disabled by default.
This cancels DHCP Relay
Snooping function.
Function
This enables DHCP network
packet that all reply on the
interface.
This command disables DHCP
network packet that all reply
on the interface.
Function
This enables DHCP network
packet that all request on the
interface.
This disables DHCP network
packet that all request on the
interface.
97